29.7.47 OutputFluidProperty
| Topic Version | 1 | Published | 12/09/2016 | ||
| For Standard | PRODML v2.0 | ||||
| Type: | Enumeration | Stereotype: | |||
Specifies the output fluid properties.
|
Name |
Type |
Notes |
|---|---|---|
|
Compressibility |
Compressibility (expected to be defined for a phase). UoM: 1/pressure. |
|
|
Density |
Density (expected to be defined for a phase). UoM: mass/volume. |
|
|
Derivative of Density w.r.t Pressure |
Derivative of density w.r.t pressure (expected to be defined for a phase). UoM: density/pressure. |
|
|
Derivative of Density w.r.t Temperature |
Derivative of density w.r.t temperature (expected to be defined for a phase). UoM: density/temperature. |
|
|
Enthalpy |
Enthalpy (expected to be defined for a phase). UoM: energy/mass. |
|
|
Entropy |
Entropy (expected to be defined for a phase). UoM: energy/temperature. |
|
|
Expansion Factor |
Expansion factor - volume expanded/volume in reservoir (expected to be defined for a phase). UoM: volume/volume. |
|
|
Formation Volume Factor |
Formation volume factor - volume in reservoir/volume expanded (expected to be defined for a phase). UoM: volume/volume. |
|
|
Gas-Oil Interfacial Tension |
Gas-oil interfacial tension. UoM: force/length. |
|
|
Gas-Water Interfacial Tension |
Gas-water interfacial tension. UoM: force/length. |
|
|
Index |
Index number (which will be the index of a row in the table). UoM: integer. |
|
|
K value |
The ratio of vapor concentration to liquid concentration at equilibrium (expected to be defined for a phase). UoM: dimensionless. |
|
|
Misc Bank Critical Solvent Saturation |
The critical solvent saturation of a miscible bank . UoM: volume/volume. |
|
|
Misc Bank Phase Density |
The density of a phase within a miscible bank (expected to be defined for a phase). UoM: density. |
|
|
Misc Bank Phase Viscosity |
The viscosity of a phase within a miscible bank (expected to be defined for a phase). UoM: viscosity. |
|
|
Miscibility Parameter (Alpha) |
The critical solvent saturation of a miscible bank. |
|
|
Mixing Parameter Oil-Gas |
Mixing parameter for oil and gas. |
|
|
Oil-Gas Ratio |
The oil-gas ratio in a vapour-liquid system. UoM: volume/volume. |
|
|
Oil-Water Interfacial Tension |
Oil-water interfacial tension. |
|
|
Parachor |
Parachor is the quantity defined according to the formula: P = γ1/4 M / D. Where γ1/4 is the fourth root of surface tension. |
|
|
Pressure |
Pressure. UoM: pressure. |
|
|
P-T Cross Term |
This is a specific parameter unique to CMG software. |
|
|
Saturation Pressure |
The saturation pressure of a mixture. UoM: pressure. |
|
|
Solution GOR |
The gas-oil ratio in a liquid-vapour system. UoM: volume/volume. |
|
|
Solvent Density |
The density of a solvent phase. UoM: density. |
|
|
Specific Heat |
The amount of heat per unit mass required to raise the temperature by one unit temperature (expected to be defined for a phase). UoM: energy/mass/temperature. |
|
|
Temperature |
Temperature. UoM: temperature. |
|
|
Thermal Conductivity |
Thermal conductivity (expected to be defined for a phase). UoM: power/length.temperature. |
|
|
Viscosity |
Viscosity (expected to be defined for a phase). UoM: viscosity. |
|
|
Viscosity Compressibility |
Slope of viscosity change with pressure in a semi-log plot (1/psi) (expected to be defined for a phase). UoM: viscosity/pressure. |
|
|
Water vapor mass fraction in gas phase |
The mass fraction of water in a gas phase. UoM: mass/mass. |
|
|
Z Factor |
The compressibility factor (z). |
|
Association |
Notes |
|---|---|
|
From: OutputFluidProperty. To: TypeEnum Generalization |
|
|
From: OutputFluidPropertyExt. To: OutputFluidProperty Generalization |